PVR-500 Tuner 0 = static Tuner 1 works

[alkirah]

Hello,

I have problems getting tuner 0 working on a pvr-500.

Using composite input for the 1st tuner, it works. Using the analog cable, it does now.

doing v4l2-ctl --all on both devices gives me this

Signal on the /dev/video0 is inexistant, as is the frequency (and changing channel with ivtv-tune just don't do anything on it.

Any ideas?

Thanks

Driver Info:
	Driver name   : ivtv
	Card type     : WinTV PVR 500 (unit #1)
	Bus info      : PCI:0000:03:08.0
	Driver version: 66561
	Capabilities  : 0x01070051
		Video Capture
		VBI Capture
		Sliced VBI Capture
		Tuner
		Audio
		Radio
		Read/Write
Format Video Capture:
	Width/Height  : 720/480
	Pixel Format  : 'MPEG'
	Field         : Interlaced
	Bytes per Line: 0
	Size Image    : 131072
	Colorspace    : Broadcast NTSC/PAL (SMPTE170M/ITU601)
Format Sliced VBI Capture:
	Service Set    : 
	Service Line  0:          /         
	Service Line  1:          /         
	Service Line  2:          /         
	Service Line  3:          /         
	Service Line  4:          /         
	Service Line  5:          /         
	Service Line  6:          /         
	Service Line  7:          /         
	Service Line  8:          /         
	Service Line  9:          /         
	Service Line 10:          /         
	Service Line 11:          /         
	Service Line 12:          /         
	Service Line 13:          /         
	Service Line 14:          /         
	Service Line 15:          /         
	Service Line 16:          /         
	Service Line 17:          /         
	Service Line 18:          /         
	Service Line 19:          /         
	Service Line 20:          /         
	Service Line 21:          /         
	Service Line 22:          /         
	Service Line 23:          /         
	I/O Size       : 0
Format VBI Capture:
	Sampling Rate   : 27000000 Hz
	Offset          : 248 samples (9.18519e-06 secs after leading edge)
	Samples per Line: 1440
	Sample Format   : GREY
	Start 1st Field : 10
	Count 1st Field : 12
	Start 2nd Field : 273
	Count 2nd Field : 12
Crop Capability Video Output:
	Bounds      : Left 0, Top 0, Width 720, Height 480
	Default     : Left 0, Top 0, Width 720, Height 480
	Pixel Aspect: 10/11
Video input : 0 (Tuner 1)
Audio input : 0 (Tuner 1)
Frequency: 0 (0.000000 MHz)
Video Standard = 0x00001000
	NTSC-M
Tuner:
	Name                 : ivtv TV Tuner
	Capabilities         : 62.5 kHz stereo lang1 lang2 
	Frequency range      : 0.0 MHz - 0.0 MHz
	Signal strength/AFC  : 0%/0
	Current audio mode   : lang1
	Available subchannels: mono lang2

Driver Info:
	Driver name   : ivtv
	Card type     : WinTV PVR 500 (unit #2)
	Bus info      : PCI:0000:03:09.0
	Driver version: 66561
	Capabilities  : 0x01030051
		Video Capture
		VBI Capture
		Sliced VBI Capture
		Tuner
		Audio
		Read/Write
Format Video Capture:
	Width/Height  : 720/480
	Pixel Format  : 'MPEG'
	Field         : Interlaced
	Bytes per Line: 0
	Size Image    : 131072
	Colorspace    : Broadcast NTSC/PAL (SMPTE170M/ITU601)
Format Sliced VBI Capture:
	Service Set    : 
	Service Line  0:          /         
	Service Line  1:          /         
	Service Line  2:          /         
	Service Line  3:          /         
	Service Line  4:          /         
	Service Line  5:          /         
	Service Line  6:          /         
	Service Line  7:          /         
	Service Line  8:          /         
	Service Line  9:          /         
	Service Line 10:          /         
	Service Line 11:          /         
	Service Line 12:          /         
	Service Line 13:          /         
	Service Line 14:          /         
	Service Line 15:          /         
	Service Line 16:          /         
	Service Line 17:          /         
	Service Line 18:          /         
	Service Line 19:          /         
	Service Line 20:          /         
	Service Line 21:          /         
	Service Line 22:          /         
	Service Line 23:          /         
	I/O Size       : 0
Format VBI Capture:
	Sampling Rate   : 27000000 Hz
	Offset          : 248 samples (9.18519e-06 secs after leading edge)
	Samples per Line: 1440
	Sample Format   : GREY
	Start 1st Field : 10
	Count 1st Field : 12
	Start 2nd Field : 273
	Count 2nd Field : 12
Crop Capability Video Output:
	Bounds      : Left 0, Top 0, Width 720, Height 480
	Default     : Left 0, Top 0, Width 720, Height 480
	Pixel Aspect: 10/11
Video input : 0 (Tuner 1)
Audio input : 0 (Tuner 1)
Frequency: 1076 (67.250000 MHz)
Video Standard = 0x00001000
	NTSC-M
Tuner:
	Name                 : ivtv TV Tuner
	Capabilities         : 62.5 kHz multi-standard stereo lang1 lang2 
	Frequency range      : 44.0 MHz - 958.0 MHz
	Signal strength/AFC  : 99%/-12500
	Current audio mode   : lang1
	Available subchannels: stereo

[dknovick]

Originally Posted by alkirah

Hello,

I have problems getting tuner 0 working on a pvr-500.

Using composite input for the 1st tuner, it works. Using the analog cable, it does now.

doing v4l2-ctl --all on both devices gives me this

Signal on the /dev/video0 is inexistant, as is the frequency (and changing channel with ivtv-tune just don't do anything on it.

Any ideas?

Thanks

Check the dmesg logs and make sure that both of the tuners are being set up properly.

So, hooking up the coax to the card, Tuner 0 doesn't work and you can get a signal (TV station) form Tuner 1?