MythTV Forum - MythTV talk http://www.mythtvtalk.com/ Welcome to the MythTV community forum. en Thu, 17 May 2012 13:47:32 GMT vBulletin 10 http://www.mythtvtalk.com/images/bluefox/misc/rss.png MythTV Forum - MythTV talk http://www.mythtvtalk.com/ <![CDATA["Watch TV" crashes FE and BE with InfiniTV 4 PCIe card]]> http://www.mythtvtalk.com/watch-tv-crashes-fe-infinitv-4-pcie-card-15601/ Thu, 17 May 2012 12:23:33 GMT I am running Mythbuntu 12.04 with Mythtv .25 BE and FE. Infinitv linux drivers are installed, I can tune a channel manually using the InfiniTV web... I am running Mythbuntu 12.04 with Mythtv .25 BE and FE. Infinitv linux drivers are installed, I can tune a channel manually using the InfiniTV web interface + mplayer. When I select "Watch TV" in mythfrontend, it freezes the entire computer so I can't even get a log. It will also freeze the computer if I schedule a recording, either through mythfrontend or from mythweb. I can play a video file through FE just fine, just not livetv.

My tuner is setup in BE to 192.168.200.1 (default address for InfiniTV device) using RTP and tuner 0. I'm using SchedulesDirect as an input source and it has done a full grab via mythfilldatabase. Has anyone successfully gotten the InfiniTV 4 working in .25? Could this possibly be an encoding problem? I looked through the encode settings for a little bit but didn't see anything that would pose a problem. ]]> General mlrabbitt http://www.mythtvtalk.com/watch-tv-crashes-fe-infinitv-4-pcie-card-15601/ Acer Revo 3610, Poor HD performance, Sound/Video out of sync. White Noise. http://www.mythtvtalk.com/acer-revo-3610-poor-hd-performance-sound-video-out-sync-white-noise-15599/ Wed, 16 May 2012 21:22:55 GMT All my computers were running X/Ubuntu 11.04. So I decided to reinstall to 12.04. I installed MythTV via the 'Ubuntu Software Centre'.
Previously MythTV had worked very well. I got the HD to work excellently with my 1080p LCD TV which is driven by an Acer Revo 3610. After updating my Acer & my server, which runs the MythBackend, the performance is terrible!
The HD video is way out of sync with the sound & the video judders. Even standard definition is not all that good.
On my desktop PC the Video is fine, with the video setting set to 'Normal' as this has AMD Radeon Graphics.

Further, and this is the same on my Desktop PC, the sound stops and then loud white noise replaces it, just like the white noise on the sound test. Sometimes this cuts in on its own but it can be triggered by moving the playback back or forward. I am using the Pulse Audio setting.
On my Revo I am using the Nvidia driver. I have tried all settings for video playback but have left it on 'VDPAU Slim' because that is was what I had on the previous installation (Ubuntu 11.04 with the previous version of MythTV)
Can anyone advise please as to what is causing these problems? ]]> Hardware technoboi http://www.mythtvtalk.com/acer-revo-3610-poor-hd-performance-sound-video-out-sync-white-noise-15599/ MythTV Backend Not Recognizing USB Penstick Tuner on Startup (Model 800e) http://www.mythtvtalk.com/mythtv-backend-not-recognizing-usb-penstick-tuner-startup-model-800e-15598/ Wed, 16 May 2012 05:59:48 GMT When the system starts for the first time (whether by a restart or by a fresh boot after being shutdown), the mythtv backend for some reason will not... When the system starts for the first time (whether by a restart or by a fresh boot after being shutdown), the mythtv backend for some reason will not recognize one of my tvtuner cards: it is a Pinnacle Systems HDTV USB penstick, model 800e.

I currently have two tvtuners in the system, my other is a Pinnacle Systems PCI 800i. I have tried removing the 800i, but that doesn't seem to affect the backend's ability to recognize the USB penstick.

The weird thing is that after I boot up, I can restart the backend and mythtv will see the USB penstick just fine. The problem is that when I am not home and need to have the system automatically record something, the system will automatically wake itself up as expected, but since the USB penstick does not automatically initialize on this first boot, the recording fails.

So at this point I am stuck. My hunch is that the backend is starting up before the USB penstick is initialized by Ubuntu, but I really don't know and I'm really not sure where or how to investigate the problem. I'm not really an expert, but I can find my way around linux (been using mythtv for about 6 years now) . . . so if someone has suggestions, or needs more information, just let me know and I'll post back. Any help would be greatly appreciated.

I'm running mythdora 64-bit 12.04 mythtv 0.25 on an AMD 64 bit system.

Thanks in advance.

BJ ]]> Hardware Bob Jones http://www.mythtvtalk.com/mythtv-backend-not-recognizing-usb-penstick-tuner-startup-model-800e-15598/ No channels found - NOVA HD-S2 http://www.mythtvtalk.com/no-channels-found-nova-hd-s2-15597/ Mon, 14 May 2012 11:09:33 GMT Hi, Please bear with me this is my first attempt at using mythtv im in the UK and trying to use the Freesat service Im running a Hauppage Nova... Hi,

Please bear with me this is my first attempt at using mythtv im in the UK and trying to use the Freesat service

Im running a Hauppage Nova HD-S2 on linux mint 12

ive installed kaffeine and i can scan and watch channels with no issues.

ive installed mythtv version 0.24.1-80-g1de0431 from the software centre and followed through all the instructions I can online.

when i goto input connection, and scan for channels I always get failed to find any new channels!

Ive followed the instructions at http://www.linuxtv.org/wiki/index.ph...are_v1.26.90.0 but again this makes no difference (Kaffeine works before and after) and confirmed the card is using 1.26.90.0

if i run dmesg|grep cx I get
Quote:
[ 23.013003] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded
[ 23.013043] cx8800 0000:02:06.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 23.019795] cx88[0]: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69,autodetected], frontend(s): 1
[ 23.019800] cx88[0]: TV tuner type -1, Radio tuner type -1
[ 23.032932] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded
[ 23.042256] cx2388x alsa driver version 0.0.8 loaded
[ 23.202486] cx88[0]: hauppauge eeprom: model=69100
[ 23.232264] input: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:02:06.0/rc/rc0/input4
[ 23.232407] rc0: cx88 IR (Hauppauge WinTV-HVR400 as /devices/pci0000:00/0000:00:1e.0/0000:02:06.0/rc/rc0
[ 23.232507] rc rc0: lirc_dev: driver ir-lirc-codec (cx88xx) registered at minor = 0
[ 23.232516] cx88[0]/0: found at 0000:02:06.0, rev: 5, irq: 23, latency: 20, mmio: 0xf8000000
[ 23.232615] cx88[0]/0: registered device video0 [v4l2]
[ 23.232652] cx88[0]/0: registered device vbi0
[ 23.233654] cx88[0]/2: cx2388x 8802 Driver Manager
[ 23.233669] cx88-mpeg driver manager 0000:02:06.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 23.233676] cx88-mpeg driver manager 0000:02:06.2: setting latency timer to 64
[ 23.233684] cx88[0]/2: found at 0000:02:06.2, rev: 5, irq: 23, latency: 64, mmio: 0xfa000000
[ 23.234354] cx88_audio 0000:02:06.1: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 23.234361] cx88_audio 0000:02:06.1: setting latency timer to 64
[ 23.234389] cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
[ 23.244799] cx88/2: cx2388x dvb driver version 0.0.8 loaded
[ 23.244804] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 23.244809] cx88[0]/2: subsystem: 0070:6906, board: Hauppauge WinTV-HVR4000(Lite) DVB-S/S2 [card=69]
[ 23.244812] cx88[0]/2: cx2388x based DVB/ATSC card
[ 23.244815] cx8802_alloc_frontends() allocating 1 frontend(s)
[ 23.259221] DVB: registering new adapter (cx88[0])
[ 249.396071] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx24116.fw)...
[ 249.417428] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
[ 254.455659] cx24116_load_firmware: FW version 1.26.90.0
[ 254.455676] cx24116_firmware_ondemand: Firmware upload complete
[ 255.004775] cx88[0]: irq mpeg [0x100000] ts_err?*
[ 255.004782] cx88[0]/2-mpeg: general errors: 0x00100000
The last 2 lines above make me believe something isnt right, but then i cant understand why Kaffeine works.

any help would be greatly appreciated as im pretty much at a brick wall now

Thanks ]]> Installation Issues swollef http://www.mythtvtalk.com/no-channels-found-nova-hd-s2-15597/ Finde kein RTL.. http://www.mythtvtalk.com/finde-kein-rtl-15596/ Mon, 14 May 2012 08:07:09 GMT Hallo Leute,

ich habe ein kleines Problem mit RTL.
Der Sendersuchlauf findet ein paar RTL-Sender, aber kein "RTL Television"
Ich habe "RTL Austria" "RTL FS" und noch 2 andere.
Bei "RTL FS" bekomme ich keine Senderdaten.
Momentan benutze ich "RTL Austria" da bekomme ich die Senderdaten angezeigt.

Nach was muss ich suchen um das richtige RTL zu bekommen?
Transponder / Frequenz?

Gruß
Thomas ]]> Allgemeines linuxer http://www.mythtvtalk.com/finde-kein-rtl-15596/ Newbie Setup Query http://www.mythtvtalk.com/newbie-setup-query-15595/ Sat, 12 May 2012 13:30:12 GMT Hi,

Not sure whether my search terms were poor, but couldn't find anything exactly on these lines -- but apologies if this has been discussed previously.

I'm looking to configure a myth front-end & back-end, the former being a SFF/Nettop with a USB DVB-T2 tuner and the latter being a current file-server (with some web bits and bobs also running on it).

Basically, I'm wanting to know whether I'll be able to use the back-end file server to pause/record TV from my front-end? My back-end only has a 100Mb ethernet adapter, so a bit scuppered in terms of network bandwidth, but would this be technically possible?

Thanks,
Louis ]]> General ldb http://www.mythtvtalk.com/newbie-setup-query-15595/ Mythbuntu 12.04 + Mystique SaTiX-S2 V3 Dual - Hilfe ich flipp aus! http://www.mythtvtalk.com/mythbuntu-12-04-mystique-satix-s2-v3-dual-hilfe-ich-flipp-aus-15594/ Thu, 10 May 2012 09:21:51 GMT Hallo! Ich brauche eure Hilfe! Ich bringe MythTV einfach nicht zum laufen. Ich habe eine Mystique SaTiX-S2 V3 CI Dual im System. Vorher erfolgreich... Hallo!
Ich brauche eure Hilfe! Ich bringe MythTV einfach nicht zum laufen. Ich habe eine Mystique SaTiX-S2 V3 CI Dual im System. Vorher erfolgreich in Ubuntu 12.04 + XBMC + TVheadend und Ubuntu Server 12.04 + XBMC + TVheadend zum Laufen gebracht.
Doch mit Myth habe ich so meine Probleme. In Mythbuntu selber habe ich die Karte installiert und erfolgreich eingebunden. Scan läuft durch und mit Kaffeine, das ich mal zur Kontrolle installiert habe, klappt es auch.
Nur in Myth funktioniert es nicht. Wenn ich die beiden Tuner im Backend einrichte, steht im Fronted-ID: Konnte keine Information und in Untertyp: Unknown error. Manchmal steht die richtige Kartenbezeichnung dort, ist im nächsten Augenblick aber auch schon wieder verschwunden. Genauso wie das LNB Menü. Manchmal da, und dann wieder weg.
Fehlermeldung im Terminal:
Can´t open DVB fronted .....
Nach mehreren Tagen des Asuprobierens, bin ich bis jetzt so weit, daß ich mit scan im Terminal eine channels.conf erstellt habe. Mit der ich dann auch (manchmal, wenn die Karten die LNB Einstellung anzeigen) im Menüpunkt Videoquellen einen Scan mit Hilfe der channels.conf machen kann, wobei er auch die Sender findet, aber am Ende trotz Auswahl keine Sender speichert.
Einen Tag später funzt dann wieder gar nichts. Kaffeine ung scan gehen immer, nur Myth macht solche Zicken. Kann das überhaupt sein? Die Programme greifen doch alle auf die selbe DVB Schnittstelle zu, oder hat Myth da irgendetwas spezielles?

Ich wäre sehr dankbar, wenn mir jemand weiterhelfen könnt.

Hat jemand die Mystique SaTiX-S2 V3 CI Dual zusammen mit Mythbuntu erfolgreich am Laufen? ]]> Probleme bei der Installation schlawinerseppel http://www.mythtvtalk.com/mythbuntu-12-04-mystique-satix-s2-v3-dual-hilfe-ich-flipp-aus-15594/ Capture Card Problems http://www.mythtvtalk.com/capture-card-problems-15593/ Thu, 10 May 2012 03:09:06 GMT Hey everyone, I want to start off by saying I am completely new to this entire setup. I had our home running on MCE prior to this, but I am thinking... Hey everyone, I want to start off by saying I am completely new to this entire setup. I had our home running on MCE prior to this, but I am thinking there is something better.

My background. I have been using and used to a windows environment pretty much exclusively. This is my first time venturing out of the windows world and I have installed Ubuntu and I am now trying to set up MythTV.

I have the front end and backend installed, but I am stuck at the area where it asks me to install the capture cards. I am used to this stuff getting detected and set up for me, so I really don't understand the details.

I have two tv cards in the computer. One came with it from HP and the second was one I bought later so I could record two things in MCE.

First Card: HP 5189-4605 WinTV HVR-1850
Second Card: - ATI TVWonder 650

Any help to get through this step would be appreciated.

Thanks,

Keith ]]> Installation Issues 94stangfan http://www.mythtvtalk.com/capture-card-problems-15593/ Hello, New to MythTV as of February 2012 http://www.mythtvtalk.com/hello-new-mythtv-february-2012-a-15592/ Wed, 09 May 2012 22:16:24 GMT Hello everyone! I installed my MythTV setup about 3 months ago in February 2012, ditching a ReplayTV and Tivo, and I couldn't be happier. While MythTV isn't as "plug and play" as those fixed function boxes, I'm an engineer and like tinkering with the system.

My HW setup consists of a dedicated backend and two dedicated frontends. The backend is a Dell OptiPlex 755/SMT, Core 2 Duo (E8400) 3.00 GHz, 4 GB RAM, 80 GB HDD. The video is stored on a Synology DS1010 NAS mounted via NFS.

The frontends are both SHUTTLE XS35GT-V2 PC Barebones with 4GB RAM and a small SSD.

My video source is Comcast through two SiliconDust HDHomerun Prime 3-tuner boxes (a total of 6 tuners).

My wife was very skeptical of this new do-it-yourself DVR, but now she is a total convert and loves it too.

Scott ]]> New Members Introduction ScottEmery http://www.mythtvtalk.com/hello-new-mythtv-february-2012-a-15592/ Mythfilldatabase takes a really long time now http://www.mythtvtalk.com/mythfilldatabase-takes-really-long-time-now-15591/ Wed, 09 May 2012 21:31:23 GMT I have a backend server which I installed back in February with Mythbuntu 11.10 and MythTV v0.25pre-4653. I've been dutifully applying updates a couple of times per week. On April 27 when I upgraded from Ubuntu 11.10 to 12.04 and MythTV v0.25-36 to v0.25-54, mythfilldatabase slowed down considerably. From the mythfilldatabase.log file, prior to the upgrades:

Code:
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: I CoreContext filldata.cpp:764 (Run) Checking day @ offset 1, date: Sat Apr 28 2012
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: I CoreContext filldata.cpp:773 (Run) Data Refresh always needed for tomorrow
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: N CoreContext filldata.cpp:922 (Run) Refreshing data for Sat Apr 28 2012
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: I CoreContext mythdbcon.cpp:422 (getStaticCon) New static DB connectionDataDirectCon
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: I CoreContext filldata.cpp:231 (GrabDDData) Retrieving datadirect data.
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: I CoreContext filldata.cpp:248 (GrabDDData) Grabbing data for Fri Apr 27 2012 offset 1
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: I CoreContext filldata.cpp:251 (GrabDDData) From Sat Apr 28 07:00:00 2012 to Sun Apr 29 07:00:00 2012 (UTC)
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: I CoreContext datadirect.cpp:1157 (GrabData) DataDirect: Grabbing listing data
Apr 27 00:03:39 mythbackend mythfilldatabase[24916]: I CoreContext datadirect.cpp:1020 (DDPost) Downloading DataDirect feed
Apr 27 00:03:55 mythbackend mythfilldatabase[24916]: I CoreContext datadirect.cpp:1032 (DDPost) Downloaded 335101 bytes
Apr 27 00:03:55 mythbackend mythfilldatabase[24916]: I CoreContext datadirect.cpp:1034 (DDPost) Uncompressing DataDirect feed
Apr 27 00:03:55 mythbackend mythfilldatabase[24916]: I CoreContext datadirect.cpp:1039 (DDPost) Uncompressed to 2935335 bytes
Apr 27 00:03:56 mythbackend mythfilldatabase[24916]: I CoreContext datadirect.cpp:468 (characters) DataDirect: Your subscription expires on Sun Feb 3 (2013) 1:39 PM
Apr 27 00:03:56 mythbackend mythfilldatabase[24916]: I CoreContext datadirect.cpp:2323 (set_lineup_type) DataDirect: sourceid 1 has lineup type: CableDigital
Apr 27 00:04:02 mythbackend mythfilldatabase[24916]: I CoreContext filldata.cpp:272 (GrabDDData) Grab complete.  Actual data from Sat Apr 28 07:00:00 2012 to Sun Apr 29 07:00:00 2012 (UTC)
Apr 27 00:04:02 mythbackend mythfilldatabase[24916]: I CoreContext filldata.cpp:276 (GrabDDData) Main temp tables populated.
Apr 27 00:04:02 mythbackend mythfilldatabase[24916]: I CoreContext filldata.cpp:279 (GrabDDData) Updating MythTV channels.
Notice that the "Grab Complete" line in red took about 6 seconds to complete. However, after the upgrade all mythfilldatabase runs look like this:
Code:
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: I CoreContext filldata.cpp:764 (Run) Checking day @ offset 1, date: Mon Apr 30 2012
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: I CoreContext filldata.cpp:773 (Run) Data Refresh always needed for tomorrow
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: N CoreContext filldata.cpp:922 (Run) Refreshing data for Mon Apr 30 2012
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: I CoreContext mythdbcon.cpp:422 (getStaticCon) New static DB connectionDataDirectCon
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: I CoreContext filldata.cpp:231 (GrabDDData) Retrieving datadirect data.
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: I CoreContext filldata.cpp:248 (GrabDDData) Grabbing data for Sun Apr 29 2012 offset 1
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: I CoreContext filldata.cpp:251 (GrabDDData) From Mon Apr 30 07:00:00 2012 to Tue May 1 07:00:00 2012 (UTC)
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: I CoreContext datadirect.cpp:1157 (GrabData) DataDirect: Grabbing listing data
Apr 29 01:00:33 mythbackend mythfilldatabase[13438]: I CoreContext datadirect.cpp:1020 (DDPost) Downloading DataDirect feed
Apr 29 01:00:54 mythbackend mythfilldatabase[13438]: I CoreContext datadirect.cpp:1032 (DDPost) Downloaded 341120 bytes
Apr 29 01:00:54 mythbackend mythfilldatabase[13438]: I CoreContext datadirect.cpp:1034 (DDPost) Uncompressing DataDirect feed
Apr 29 01:00:54 mythbackend mythfilldatabase[13438]: I CoreContext datadirect.cpp:1039 (DDPost) Uncompressed to 3052892 bytes
Apr 29 01:00:55 mythbackend mythfilldatabase[13438]: I CoreContext datadirect.cpp:468 (characters) DataDirect: Your subscription expires on Sun Feb 3 (2013) 1:39 PM
Apr 29 01:01:21 mythbackend mythfilldatabase[13438]: I CoreContext datadirect.cpp:2323 (set_lineup_type) DataDirect: sourceid 1 has lineup type: CableDigital
Apr 29 01:18:02 mythbackend mythfilldatabase[13438]: I CoreContext filldata.cpp:272 (GrabDDData) Grab complete.  Actual data from Fri May 11 07:00:00 2012 to Sat May 12 07:00:00 2012 (UTC)
Apr 29 01:18:02 mythbackend mythfilldatabase[13438]: I CoreContext filldata.cpp:276 (GrabDDData) Main temp tables populated.
Apr 29 01:18:02 mythbackend mythfilldatabase[13438]: I CoreContext filldata.cpp:279 (GrabDDData) Updating MythTV channels.
Notice that the "Grab Complete" line now takes over 16 minutes to execute. As a result of this my mythfilldatabase runs have gone from runtimes of about 3 minutes to about 70 minues.

I can't see anything in the log files which indicates some sort of error. Nor is there any information about what's going on during those 16 minutes. The system load spikes to around 2.00 (the server is a dual processor Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz). I'm currently running v0.25-61 and have the same problem.

Has anyone else seen a similar performance problem after upgrading to 12.04 and v0.25-54?

Can anyone provide some pointers about where I should look to narrow down this performance problem?

Thanks,
Scott ]]> Installation Issues ScottEmery http://www.mythtvtalk.com/mythfilldatabase-takes-really-long-time-now-15591/ mythwelcome wakeup.. http://www.mythtvtalk.com/mythwelcome-wakeup-15590/ Wed, 09 May 2012 18:23:11 GMT Hi Leute, ich weiss ich weiss. Ein altes Thema. Aber ich grabe jetzt seit 2 tagen im Internet, aber irgendwie stehe ich auf dem Schlauch. Ich... Hi Leute,

ich weiss ich weiss. Ein altes Thema.
Aber ich grabe jetzt seit 2 tagen im Internet, aber irgendwie stehe ich auf dem Schlauch.

Ich bin hier nach vorgegangen:
http://www.mythtv.org/wiki/ACPI_Wakeup

Das..
sudo sh -c "echo 0 > /sys/class/rtc/rtc0/wakealarm"

das..
sudo sh -c "echo `date '+%s' -d '+ 5 minutes'` > /sys/class/rtc/rtc0/wakealarm"

und das...
cat /sys/class/rtc/rtc0/wakealarm

spukt mir das ..
1336585080

und bei dem ..
cat /proc/driver/rtc

sehe ich das..
rtc_time : 17:33:21
rtc_date : 2012-05-09
alrm_time : 17:38:00
alrm_date : 2012-05-09
alarm_IRQ : yes
alrm_pending : no
update IRQ enabled : no
periodic IRQ enabled : no
periodic IRQ frequency : 1024
max user IRQ frequency : 64
24hr : yes
periodic_IRQ : no
update_IRQ : no
HPET_emulated : no
BCD : yes
DST_enable : no
periodic_freq : 1024
batt_status : okay

Meine Uhrzeit liegt 2 Stunden zurück. Wir haben jetzt 19:33 Uhr
Ich weiss UTC - Localtime problem.

Also bin nach folgendem Vorgegangen.

###############################################
Setting alarm when BIOS clock is in localtime ...

The BIOS clock is in localtime, however wakealarm must be given a UTC time.

Also habe ich folgendes als "ROOT" ausgeführt. Als User thomas,- (mythtv user ist in der sudoers eingetragen) - hatte ich keine Rechte das folgende auszuführen.

date -u --date "2008-12-22 10:45:00" +%s

SECS=`date -u --date "2008-12-22 10:45:00" +%s`
echo 0 > /sys/class/rtc/rtc0/wakealarm
echo $SECS > /sys/class/rtc/rtc0/wakealarm

Beim anschießenden Check kam dann folgendes raus
cat /proc/driver/rtc

rtc_time : 17:36:52
rtc_date : 2012-05-09
alrm_time : 17:41:47
alrm_date : 2012-05-09
alarm_IRQ : no
alrm_pending : no
update IRQ enabled : no
periodic IRQ enabled : no
periodic IRQ frequency : 1024
max user IRQ frequency : 64
24hr : yes
periodic_IRQ : no
update_IRQ : no
HPET_emulated : no
BCD : yes
DST_enable : no
periodic_freq : 1024
batt_status : okay

Soweit ich sehe befinde ich mich "zeitlich" immer noch in der Vergangenheit.

Wenn ich also den Rechner herunterfahre das er mir wieder neu startet passiert das nie weil er ja 2 Stunden in der Vergangenheit ist.

Kann mir bitte jemand sagen "was" ich "wo" ändern muss damit das funktioniert.
Vor 2 Jahren hatte ich meinen Rechner zum letzten mal angefasst. Ich hätte die Pfoten von dem Update lassen sollen. Es ist jedes mal das selbe. Nach einem Update geht nichts mehr.


Verzweifelte Grüße
Thomas ]]> Allgemeines linuxer http://www.mythtvtalk.com/mythwelcome-wakeup-15590/ Mythtv 0.25 kann die Wiedergabe von Videos/Aufnahmen nicht beenden... http://www.mythtvtalk.com/mythtv-0-25-kann-die-wiedergabe-von-videos-aufnahmen-nicht-beenden-15589/ Wed, 09 May 2012 12:14:37 GMT Halle Leute neues Problem. Kubuntu 12.4 Mythtv 0.25 Wenn ich eine Aufnahme oder Video anschaue, dann kann ich die Wiedergabe nicht beenden. ... Halle Leute neues Problem.

Kubuntu 12.4
Mythtv 0.25

Wenn ich eine Aufnahme oder Video anschaue, dann kann ich die Wiedergabe nicht beenden.

Hilft nur mythtv-frontend "abschießen" STRG - ALT - ESC

Ich kann wohl Pausieren/Starten und Spulen, aber mit ESC den Film verlassen geht nicht.
Ich habe schon alle Tasten sowie Kombination probiert. Ich habe in den Keyboard-Einstellungen auch nirgends eine Kombi gefunden die mir erlaubt die Aufnahme/Video zu beenden.

Irgendwer ne Idee?

Gruß
Thomas ]]> Allgemeines linuxer http://www.mythtvtalk.com/mythtv-0-25-kann-die-wiedergabe-von-videos-aufnahmen-nicht-beenden-15589/ VDPAU: Error at mythrender_vdpau.cpp:1539 (#1, Unknown) http://www.mythtvtalk.com/vdpau-error-mythrender_vdpau-cpp-1539-1-unknown-15588/ Wed, 09 May 2012 02:35:49 GMT I just installed Myth 0.25 frontend on my laptop, running Ubuntu 12.04. The laptop has a Quadro NVS 140M, which is supported under feature set A for... I just installed Myth 0.25 frontend on my laptop, running Ubuntu 12.04. The laptop has a Quadro NVS 140M, which is supported under feature set A for vdpau.

When I try to watch TV or watch a recording, I end up with: VDPAU: Error at mythrender_vdpau.cpp:1539 (#1, Unknown) and it errors out back to the menu. All of my recordings are in HD 1080i (OTA), so I can't play the video without vdpau. I had it working under Ubuntu 9.04 on this laptop.

mythfrontend --version shows it was compiled with vdpau support.

Using the nouveau drivers, as far as I can tell...

Any thoughts?

Code:
2012-05-08 22:10:24.974622 E  Preview: 2061_2012-05-08T16:30:00:
2012-05-08 22:10:25.137049 I  VideoOutput: Allowed renderers: vdpau
2012-05-08 22:10:25.137090 I  VideoOutput: Allowed renderers (filt: vdpau): vdpau
2012-05-08 22:10:25.200937 I  VDP: Accepting: cmp(> 0 0) dec(vdpau) cpus(1) skiploop(disabled) rend(vdpau) osd(vdpau) osdfade(disabled) deint(vdpaubobdeint,vdpauonefield) filt(vdpauskipchroma,colorspace=0)
2012-05-08 22:10:25.200959 I  VDP: LoadBestPreferences(2048x2048, 0)
2012-05-08 22:10:25.200986 I  VDP: LoadBestPreferences(2048x2048, 60)
2012-05-08 22:10:25.201007 I  VDP: LoadBestPreferences(1920x1080, 60)
2012-05-08 22:10:25.201032 I  VideoOutput: Preferred renderer: vdpau
2012-05-08 22:10:25.201046 I  VideoOutput: Trying video renderer: 'vdpau'
2012-05-08 22:10:25.639955 D  ColourSpace: Brightness: -0.0000 Contrast: 1.0000 Saturation: 1.0000 Hue: 0.0000 StudioLevels: 0
2012-05-08 22:10:25.639981 D  ColourSpace: 1.1644 0.0000 1.5972 -0.8748
2012-05-08 22:10:25.640000 D  ColourSpace: 1.1644 -0.3916 -0.8128 0.5315
2012-05-08 22:10:25.640017 D  ColourSpace: 1.1644 2.0184 0.0000 -1.0862
2012-05-08 22:10:25.640039 D  ColourSpace: Brightness: -0.0000 Contrast: 1.0000 Saturation: 1.0000 Hue: 0.0000 StudioLevels: 0
2012-05-08 22:10:25.640056 D  ColourSpace: 1.1644 0.0000 1.5972 -0.8748
2012-05-08 22:10:25.640074 D  ColourSpace: 1.1644 -0.3916 -0.8128 0.5315
2012-05-08 22:10:25.640091 D  ColourSpace: 1.1644 2.0184 0.0000 -1.0862
2012-05-08 22:10:25.640112 D  ColourSpace: Brightness: -0.0000 Contrast: 1.0000 Saturation: 1.0000 Hue: 0.0000 StudioLevels: 0
2012-05-08 22:10:25.640130 D  ColourSpace: 1.1644 0.0000 1.5972 -0.8748
2012-05-08 22:10:25.640148 D  ColourSpace: 1.1644 -0.3916 -0.8128 0.5315
2012-05-08 22:10:25.640164 D  ColourSpace: 1.1644 2.0184 0.0000 -1.0862
2012-05-08 22:10:25.640185 D  ColourSpace: Brightness: -0.0000 Contrast: 1.0000 Saturation: 1.0000 Hue: 0.0000 StudioLevels: 0
2012-05-08 22:10:25.640202 D  ColourSpace: 1.1644 0.0000 1.5972 -0.8748
2012-05-08 22:10:25.640220 D  ColourSpace: 1.1644 -0.3916 -0.8128 0.5315
2012-05-08 22:10:25.640236 D  ColourSpace: 1.1644 2.0184 0.0000 -1.0862
2012-05-08 22:10:25.640258 D  ColourSpace: Brightness: -0.0000 Contrast: 1.0000 Saturation: 1.0000 Hue: 0.0000 StudioLevels: 0
2012-05-08 22:10:25.640275 D  ColourSpace: 1.1644 0.0000 1.5972 -0.8748
2012-05-08 22:10:25.640292 D  ColourSpace: 1.1644 -0.3916 -0.8128 0.5315
2012-05-08 22:10:25.640308 D  ColourSpace: 1.1644 2.0184 0.0000 -1.0862
2012-05-08 22:10:25.860666 I  VDP: Accepting: cmp(> 0 0) dec(vdpau) cpus(1) skiploop(disabled) rend(vdpau) osd(vdpau) osdfade(disabled) deint(vdpaubobdeint,vdpauonefield) filt(vdpauskipchroma,colorspace=0)
2012-05-08 22:10:25.860689 I  VDP: LoadBestPreferences(2048x2048, 0)
2012-05-08 22:10:25.860716 I  VDP: LoadBestPreferences(2048x2048, 60)
2012-05-08 22:10:25.860765 I  VideoOutWindow::SetPIPState. pip_state: 0]
2012-05-08 22:10:25.860781 I  VDP: LoadBestPreferences(2048x2048, 29.97)
2012-05-08 22:10:25.860805 I  Clearing OpenGL painter cache.
2012-05-08 22:10:26.172566 I  Snapping height to avoid scaling: height: 1080, top: -15
2012-05-08 22:10:26.172600 I  Display Rect  left: 0, top: -15, width: 1680, height: 1080, aspect: 1.33333
2012-05-08 22:10:26.172617 I  Video Rect    left: 0, top: 0, width: 1920, height: 1080, aspect: 1.33333
2012-05-08 22:10:26.172634 I  VDP: LoadBestPreferences(1920x1088, 29.97)
2012-05-08 22:10:26.172665 I  Snapping height to avoid scaling: height: 1080, top: -15
2012-05-08 22:10:26.172682 I  Display Rect  left: 0, top: -15, width: 1680, height: 1080, aspect: 1.33333
2012-05-08 22:10:26.172698 I  Video Rect    left: 0, top: 0, width: 1920, height: 1080, aspect: 1.33333
2012-05-08 22:10:26.172714 I  VDP: SetVideoRenderer(vdpau)
2012-05-08 22:10:26.172727 I  VDP: SetVideoRender(vdpau) == GetVideoRenderer()
2012-05-08 22:10:26.173808 I  VideoOutput: Pixel dimensions: Screen 1680x1050, window 1680x1050
2012-05-08 22:10:26.173828 I  VideoOutput: Actual display dimensions: 330x211 mm  Aspect: 1.56398
2012-05-08 22:10:26.173843 I  VideoOutput: Estimated window dimensions: 330x211 mm  Aspect: 1.56398
2012-05-08 22:10:26.173861 I  VidOutVDPAU: Enabling SkipChromaDeinterlace.
2012-05-08 22:10:26.184791 E  VDPAU: Error at mythrender_vdpau.cpp:1539 (#1, Unknown)
2012-05-08 22:10:26.184807 E  VDPAU: Failed to create VDPAU device.
2012-05-08 22:10:26.184819 E  VDPAU: No VDPAU device
2012-05-08 22:10:26.184825 E  VDPAU: Failed to create VDPAU render device.
2012-05-08 22:10:26.184835 E  VidOutVDPAU: Failed to initialise VDPAU
2012-05-08 22:10:26.184848 I  VidOutVDPAU: DiscardFrames(1)
2012-05-08 22:10:26.184881 I  VideoBuffers::DiscardFrames(1):
2012-05-08 22:10:26.184908 I  VideoBuffers::DiscardFrames(1):  -- done
2012-05-08 22:10:26.184921 I  VidOutVDPAU: DiscardFrames() 3:  -- done()
2012-05-08 22:10:26.185281 I  VidOutVDPAU: DiscardFrames(1)
2012-05-08 22:10:26.185293 I  VideoBuffers::DiscardFrames(1):
2012-05-08 22:10:26.185305 I  VideoBuffers::DiscardFrames(1):  -- done
2012-05-08 22:10:26.185314 I  VidOutVDPAU: DiscardFrames() 3:  -- done()
2012-05-08 22:10:26.185348 E  VideoOutput: Not compiled with any useable video output method.
2012-05-08 22:10:26.185364 E  Player(0): Couldn't create VideoOutput instance. Exiting..
2012-05-08 22:10:26.185382 E  Player(0): Unable to initialize video.
2012-05-08 22:10:46.211529 E  playCtx: StartPlaying() Failed to start player
2012-05-08 22:10:46.211577 I  Player(0): StopPlaying - begin
2012-05-08 22:10:46.211681 I  Player(0): Exited decoder loop.
2012-05-08 22:10:46.211702 I  Player(0): StopPlaying - end
Mythtv version information:

Code:
mythfrontend --version
Please attach all output as a file in bug reports.
MythTV Version : v0.25
MythTV Branch : fixes/0.25
Network Protocol : 72
Library API : 0.25.20120408-1
QT Version : 4.8.1
Options compiled in:
 linux profile use_hidesyms using_alsa using_oss using_pulse using_pulseoutput using_backend
using_bindings_perl using_bindings_python using_bindings_php using_crystalhd using_dvb using_firewire
using_frontend using_hdhomerun using_ceton using_hdpvr using_iptv using_ivtv using_joystick_menu
using_libcrypto using_libdns_sd using_libxml2 using_lirc using_mheg using_opengl_video using_qtwebkit
using_qtscript using_qtdbus using_v4l2 using_x11 using_xrandr using_xv using_bindings_perl
using_bindings_python using_bindings_php using_mythtranscode using_opengl using_vaapi using_vdpau
using_ffmpeg_threads using_live using_mheg using_libass using_libxml2
]]> Hardware zxarr http://www.mythtvtalk.com/vdpau-error-mythrender_vdpau-cpp-1539-1-unknown-15588/ mythconverg_backup.pl http://www.mythtvtalk.com/mythconverg_backup-pl-15587/ Tue, 08 May 2012 15:55:55 GMT Hallo Leute,

ich habe heute mit dem befehl "mythconverg_backup.pl --verbose" ein Backup gemacht von meiner Datenbank weil ich den Rechner neu aufziehen wollte.
Nun wollte ich mit "mythconverg_restore.pl --verbose" die Datenbank wieder herstellen, aber das geht nicht. Er verlangt einen Pfad:
ERROR: DBBackupDirectory not specified, stopped at ./mythconverg_restore.pl line 773.
Was muss ich den da eingeben. Ich bin davon ausgegangen das ich nichts eingeben musste weil er mich ja auch nicht beim Backup gefragt hat.
Ich habe auf die 12.4 er ein Update gemacht und es ist eine standard installation.

Bitte um Hilfe. :(
Gruß
Thomas ]]> Allgemeines linuxer http://www.mythtvtalk.com/mythconverg_backup-pl-15587/ Mythtv 0.24 and Unicable http://www.mythtvtalk.com/mythtv-0-24-unicable-15586/ Tue, 08 May 2012 14:00:03 GMT Hi all,

I'm planning to build a TBS-DVB-S2 card into my OpenSuse 11.4 / Mythtv 0.24 setup.
The card is able to use Unicable. My question is: Is mythtv? I read some things about patching and building mythtv from source. Is this really still required? I might considder upgrading mythtv to 0.25 if that helps avoiding a recompile.

Any experience here?

Kind regards,
Martin ]]> General smartysmart34 http://www.mythtvtalk.com/mythtv-0-24-unicable-15586/ 0.25-80 pain and suffering http://www.mythtvtalk.com/0-25-80-pain-suffering-15585/ Tue, 08 May 2012 11:27:27 GMT Hi All, I seem to have a problem that has developed all of a sudden today, and yes there have been no system changes. I am running MythBuntu... Hi All,

I seem to have a problem that has developed all of a sudden today, and yes there have been no system changes.

I am running MythBuntu 11.10, upgraded to Myth 0.25-80. The hardware config is a Acer Aspire Revo with 4GB of ram.

Today, without warning, my system started playing back video and audio in a very stuttered fashion. The system is configured to use VDPAU/Normal, and has been configured like this for months.

There is no indication in the logs that there is a problem, in fact I note that if I set the system to use Either CPU, then the audio are played OK, but out of Sync. Any suggestions would be welcomed. I am contemplating upgrading to MythBuntu 12.04, but would prefer to avoid that if at all possible.

I have also confirmed that fsck sees no issues on the disk, and that the CPU is not running hot at all.

I look forward to any assistance or insight that can be offered. ]]> Installation Issues lsheaves http://www.mythtvtalk.com/0-25-80-pain-suffering-15585/ NO LiveTV After upgrade to 0.25 http://www.mythtvtalk.com/no-livetv-after-upgrade-0-25-a-15584/ Tue, 08 May 2012 11:21:37 GMT Hello

I recently upgraded (partial upgrade)to from 0.24 fixes to 0.25 and LiveTv doesn't work anymore neither does recording all I get is a black screen. I get my signal from a STB and it is working fine.

I have also posted on the mytbuntu forum (apologies for cross posting) http://ubuntuforums.org/showthread.php?t=1970441

Andrew ]]> Installation Issues chewiesw http://www.mythtvtalk.com/no-livetv-after-upgrade-0-25-a-15584/ possible to make mythtv switch tuner in order to accomplish a channel switch? http://www.mythtvtalk.com/possible-make-mythtv-switch-tuner-order-accomplish-channel-switch-15583/ Tue, 08 May 2012 11:10:28 GMT Hello, I installed mythbuntu 11.10 and set up mythtv. I have a dual tuner card: terratec cinergy t pcie dual. It was hard getting it to work... Hello,
I installed mythbuntu 11.10 and set up mythtv. I have a dual tuner card: terratec cinergy t pcie dual. It was hard getting it to work properly, but now it is done, :)
My question is about switching channels while seeing live TV. I have observed that mythtv does not accomplish an automatic change of tuner in order to execute a change of channel requested by user. Will explain with an example:
- Tuner 1 is busy recording. I am watching this same recorded channel, in a live TV session.
- if I try to switch to a channel in the same multiplex, no problem, the tuner must not be "touched" and channel change is accomplished. I am still watching something that comes from tuner 1.
- But if I try to change to a channel in a different multiplex the order is not executed by mythtv, even if the second tuner is not in use. To switch channel I have to first switch tuner (there is a live TV menu option to do so) and after, once in the second tuner, switch to the channel I want.

I have activated the option "use for live tv the less probable tuner to be in use by a recording" or something like that. I think that the only thing that makes this option is to use by default the "2nd tuner" when you start a live tv session, while the recordings usually use "1st tuner". Anyway, not sure. Someone able to confirm/correct? Anyway, I think this option does not prevent the situation that I explained before, only makes it less probable.

All in all, it seems to me a weird behaviour more related to hardware concepts than to usability. If there is no option I will live with it, but I am wondering how I am going to explain to my family what a multiplex is and why it is so hard to switch channels...

So my final question is: can I configure it in a way that mythtv switches the tuner automatically to accomplish a change of channel ordered by user? ]]> General rrofes http://www.mythtvtalk.com/possible-make-mythtv-switch-tuner-order-accomplish-channel-switch-15583/ A couple of MythMusic questions http://www.mythtvtalk.com/couple-mythmusic-questions-15582/ Tue, 08 May 2012 08:11:43 GMT So I did an upgrade, and now I'm on 0.25, and MythMusic is very, very different. I wasn't paying attention so I didn't see it coming.

I can't find any documentation that really explains how to, you know. DO stuff. I understand everything is a playlist now - that's fine, except... where are all my playlists? After upgrading to 0.25 my "current playlist" is what was in the active play queue before. I can't figure out how to switch between playlists. The Menu->Playlist Options doesn't have a "Load Playlist" option.

I'm trying to figure out how to listen to an actual album - is the only way to do this to create a playlist for that album? That seems cumbersome. I'd give that a shot except I don't know how I'd switch back to a different playlist...

Also, with 0.24 I could use keybindings (linked to my remote control) to switch the Shuffle Mode and Repeat. Can't find any keybindings for these anymore, have to go through the menu. Is there any way to get that back? I don't see those in the music section in Edit Keys.

Anyone have any ideas? I have some non-tech-savvy people using my myth system and I'm looking for simple solutions for them... ]]> General sterlingphoenix http://www.mythtvtalk.com/couple-mythmusic-questions-15582/ Headless backend server? http://www.mythtvtalk.com/headless-backend-server-15581/ Mon, 07 May 2012 18:27:42 GMT and by "headless" I mean no Xorg at all.
grabbed the source and tried to compile it on the server given the gentoo package is rather out of date.

the big problem? The qtwebkit requirement requires X which I rather don't want to install on a machine that's never going to see a GUI.

so i'm wondering if it's even possible do this?
Rather want something to replace win 7 media center (suffice to say it sucks) on the HTPC and would rather have the fileserver run the master backend given it has both lots more storage available to it and it's own UPS. ]]> Installation Issues Freakazoid http://www.mythtvtalk.com/headless-backend-server-15581/